Jeet Kune Do Dummy w/ Wallmount Stand

• This design makes your dummy come alive!
• It has a flex to it and gives your dummy great action when training.
• Includes four adjustable brackets to allow for a custom height adjustment from 55" - 65".  For multiple users who require two different height adjustements, you will need to order a second set of brackets.
• Requires no assembly and easily mounts to your wall with six 3" screws.
• Stand is 70" tall x 11" wide. The width of the mounted stand can be set from 36" wide to 68" wide to suit your training needs.
• The farther apart you set the stand towers, the more action you get!

ABOUT THE DUMMY

• The spacing between the arms and leg is the same as the traditional dummy.
• Standard dummy body is 61" tall and 9" in diameter.
• There is 8.5" from mid arm to upper arm and from mid arm to leg
• 100% Ash arms measure 12.5" long and are off set (level arms available)
• Arm pegs are 1.5" x 2" (much stronger than the standard 1.5" x 1.5")
• Our striking head pad works perfectly with the JKD neck
• The body is constructed with a 14" deep 3 1/4" x 3 1/4" hole in the bottom to allow it to be used with any of our stands or to be set onto a post in the ground for outdoor training.
• 3" solid Ash or 2" metal* leg available.  Our new Ash legs are rounded rather than square.
• Weighs 85 lbs.
• Our dummy bodies work with our stands only.

DUMMY PADS ARE A MUST!

Once you get your dummy, you'll want to get training right away! So, to prevent injury and enable you to go "all out" on your dummy, we suggest purchasing head and body striking pads.

*The metal and ash legs require different sized peg holes, they are not interchangeable (i.e. If you purchase an ash leg and decide later you want metal instead, it will not fit the dummy.)