Jeet Kune Do Dummy w/ Modern Freestand

• No mounting or large frame required which is ideal when space is limited!
• Rear platform weight tray can be loaded with a plastic tote filled with 200 lbs. of sand bags, cinder blocks or metal weights or can be mounted directly to the floor.
• Standard stand includes four 3/4" plates allowing height adjustment from 58" to 511".
• Optional tall stand is available for those over 511" for only $30.
• Front of base width is 11". Back width is 36". Front to back of base is 35.5".

ABOUT THE DUMMY

• Dummy body can also be used with any of our other stands
• The spacing between the arms and leg is the same as the traditional dummy
• Standard dummy body is 61" tall and 9" in diameter
• There is 8.5" from mid arm to upper arm and from mid arm to leg
• 100% Ash arms measure 12.5" long and are off set (level arms available)
• Our striking head pad works perfectly with the JKD neck
• Arm pegs are 1.5" x 2", much stronger than the standard 1.5" x 1.5"
• The body is constructed with a 14" deep 3 1/4" x 3 1/4" hole in the bottom to allow it to be used with any of our stands or to be set onto a post in the ground for outdoor training.
• 3" solid Ash or 2" metal* leg available. Our new Ash legs are rounded rather than square.
• Weighs 85 lbs.
• Our dummy bodies work with our stands only.

DUMMY PADS ARE A MUST!

Once you get your dummy, you'll want to get training right away! So, to prevent injury and enable you to go "all out" on your dummy, we suggest purchasing head and body striking pads. 

*The metal and ash legs require different sized peg holes, they are not interchangeable (i.e. If you purchase an ash leg and decide later you want metal instead, it will not fit the dummy.)